DRAKA LV POWER CABLE - LSHF - Armoured(SWA) CU/XLPE/LSHF/SWA/LSHF-AT-AR 600/1000V TO IEC60502-1, IEC60332-3-22  Cable Type :   CU/XLPE/LSHF/SWA/LSHF-AT-AR Voltage :   600/1000V Design Standard :   IEC 60502-1 Conductor Standard : IEC 60228, BS 6360 Flame Propagation : IEC 60332-3-22 (Flame Retardant)   read more

Draka ALUPAC Instrumentation cable (Hydrocarbon Resistance Cable) CU/XLPE/OSCR/ALUPAC/SWA/LSHF-AT-AR 500V TO BSEN 50288-7, IEC60332-3-22 Application Multipair instrumentation cable for interconnection of measuring devices e.g. pressure and temperature gauges, flow meters, process-control systems, etc. Cable suitable for permanent installation in an agressive chemical environment. Not suitable for power installations and direct connection to the main power supply. Construction Conductor: (Cu) Plain annealed stranded copper conductor Class 2, IEC 60228, BS6360 Insulation : (XLPE) Cross-linked Polyethylene compound  Pairing / Twining Two/Three/Four insulated cores are cabled together and covered with a polyester tape wrapping Assembly: Multiple pairs/triads/quads are cabled together, supplied with non-hygroscopic filler (optional) to obtain a circular construction and covered with a polyester tape wrapping Overall screen: (OSCR) Min. 30% overlap of aluminium backed polyester tape in contact with 0.5mm² (16/0.20mm) tinned annealed drain wire followed by a polyester tape wrapped over the screening tape Moisture Barrier EMI protection: (ALUPAC) Min. 30% overlap of aluminium backed polyester tape in contact with 0.5mm² (16/0.20mm) tinned annealed drain wire followed by a polyester tape wrapped over the screening tape Inner Covering: (ALUPAC) the cable assembly is completely covered with an aluminium foil, coated on one side. Inner covering: (ALUPAC) Polyamide Nylon-12 compound. Black Armour: galvanised steel wire armour. Outer Sheath (LSHF-AT-AR) Low smoke zero halogen compound with anti-termite and anti-rodent additives. Black (Optional: Blue colour for Intrinsically Safe) Insulation color 1 pair in Black & White 2 pair & above -each pair in Black & White core with numbering. 1 triad in Black, White & Red 2 triad & a bove –each triad in Black, White & Red printed with   numbering. Technical Data Reference Standard BS EN 50288-7 Voltage 500V Max Operating Temperature +90ºC Halogen Free IEC 60754 Low Smoke Emission IEC 61034 Flame Retardant IEC 60332-3-22 Max. Conductor Resistance ≤7.41Ω/km at  20°C(2.5mm²) ≤12.1Ω/km at  20°C(1.5 mm²) Max. Mutual Capacitance(at 1 KHz) ≤ 150pF/min    (1.5-2.5 mm²) Max. L  /R Ratio ≤ 40μF/min (1.5-2.5 mm²) Test Voltag 2000Vac for 1 minute Bending Radius 10 x overall diameter   read more

FABER KABEL Profibus L2-FIP, DP,FMS 150 Application PVC-shielded bus cable for PROFIBUS® systems for e.g. Siemens L2-DP, F.I.P.,®- in fieldbus systems.Profibus is an international fieldbus-standard for universal application in production and process automation. For fixed indoor installation Cable Structure & Features Conductor material Bare copper (solid conductor Class 1) Core insulation Foam skin Core identification Red, green Screen Tinned copper braided, over aluminum  foil tape, single  layer overlapped Outer  sheath PVC Sheath  colour Violet  RAL 4001,Grey Ral 7001 or transparent Flame-retardant VDE 0482-332-1-2 / IEC 60332-1-2 UV-Resistant Yes Printing Yes         Special Features / Remark   Technical Data Rated voltage 0.64mm:250V  Maximum operating capacity 30 nF/  km Characteristic impedance 150+/-15Ω Transfer rate 1,500 kBit/s Transfer size 200m Min. bending radius 8 x d Operating temp. -30°C / +80°C read more

DRAKA MAX-FOH Double Insulation Single Core Fire Resistant Cable MGT/XLPE/LSHF 600/1000V TO IEC60502-1,  IEC60332-3-22 IEC60331-21,  SS299/BS6387 CAT.CWZ Application For use in most power and control circuits.Features XLPE Insulation for high operating temperatures, thermal short circuit rating and durability.   Cable Structure & Features Conductor material (CU) Plain annealed stranded circular copper conductor, Class 2 Fire proof layer (MGT) Mica tape to IEC60331-21/SS229-1/BS6387 Insulation (XLPE) Cross-linked polyethylene, XLPE Sheath (LSHF) low smoke halogen free compound     Applicable standards   Design standard: Conductor standarf: Flame propagation: Circuit integrity: Corrosive gas-free: Low smoke density: Halogen-free: IEC 60502-1 IEC 60228, BS 6360 IEC 60332-3-22 IEC 60331-21, SS299-1/BS6387 Cat. CWZ IEC 60754-2 IEC 61034-2 IEC 60754-1 Technical Data Sheath colour Orange Printing Yes Rated voltage 600/1000V Min. insulation Resistance @ 20ºC 2000MΩ.km Short circuit temperature 250°C Max. conductor temperature 90°C Operating temperature range -15°C / +90°C Installation temperature  0°C / +50°C read more

FABER KABEL EMC Connecting Cable (Servo Motor Cable) 600/1000V 2YSL(St)Cyv Application This cable was specifically developed for the EMC-compliant connection of frequency converters. For uses with medium mechanical strain with permanent installation and occasional motion indoors and outdoors, but not in the ground. The version with the three-stranded protective conductor is thinner, lighter and distinguished by improved EMC-properties. The cable is largely oil-resistant. Cable Structure & Features Conductor material Bare copper strand Conductor construction Acc. to Din VDE 0295 class 5 resp, IEC 228 class5 Core insulation PE (Polyethylene) Core identification Acc. to Din VDE  0293-308 coloured cores with green/yellow Screen Aluminium foil + tinned copper braid Screen coverage 75% Outer sheath PVC, enforced Sheath colour Black Flame-retardant VDE 0482-332-1-2 / IEC 60332-1-2 UV-resistant yes Oil-resistant EN 60811-404 For outdoor use yes Max. temperature at conductor, °C 70°C Permitted outer cable temperature, fixed, °C -30 - +70°C Permitted outer cable temperature, moved, °C 15 - + 70°C Transfer impedance 250 Ω/km     Special Features / Remarks   Largely resistant to acids, bases and usual oils Free from lacquer damaging substances and silicone (during production) Low operating capacity, low coupling resistance UV-proofed PVC outer sheath (black sheath) Recommended for EMC-applications Conform to RoHS The on the right side listed current carrying capacities correspond to an ambient temperature of 30 degrees. For higher temperatures: Please look at the technical guidelines. We are pleased to produce special versions, other dimensions, core and jacket colourson request. read more