FABER KABEL 450/750V H07ZZ-F (Rubber Low Smoke Halogen Free Cable) Application These cable are used for installation inside of buildings and in free air. Particularly designed for applications, where in the case of fire only small quantities of smoke and corrosive gases are allowed.   Construction and technical data   Conductor material bare copper strand Conductor construction fine stranded, class 5 Insulation: rubber EI8 Sheathing material: rubber (EPR) EM8 Flame-retardant: VDE 0482-266-2-4/IEC 60332-3-24 (Cat.C) Smoke density: DIN EN 61034 / IEC 61034 Halogen free: DIN EN 50267 / IEC 60754 Maximum temperature at conductor, °C: 90 °C Max. operating temperature, fixed, °C: -40 - +70 °C Temperature, moved / during installation °C: -5 - +70 °C Nominal voltage Uo/U 450/750V Test voltage: 2.5kV Core identification: colours acc. to VDE 0293 (HD 308); more than 5 cores: gn-ye + numbers     read more

300/500V 2s-lift Pendant Cable Application For the connection of control buttons or as unsupported switch cable for heights up to 50 m. For indoor or outdoor use.   Construction and technical data   Conductor material bare copper strand Conductor construction class 5 - flexible Insulation: PVC Self-supporting element: steel Sheathing material: PVC Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2 Maximum temperature at conductor, °C: 70 °C Permitted outer cable temperature, fixed, °C: -30 - +70 °C Permitted outer cable temperature, moved, °C: -5 - +70 °C Bending radius, fixed installation: 10 x OD Bending radius, moving application: 10 x OD Tensile strength (during installation): 1400 N Nominal voltage Uo/U 300/500V Test voltage: 2kV Core identification: Number coded with Gn/Ye     read more

PRYSMIAN FLEXTREME 450/750V H07RN-F (Rubber Cable) Application The FLEXTREME conception guarantees a product of great suppleness offering excellent resistance to inclement environmental condition and to oils & greases as well as adverse mechanical and thermal effects. This makes FLEXTREME products ideal for installation on equipment in continual and interrupted operation under aggressive conditions, (e.g. construction site vehicles, generators, pumps, etc), as well as most other extreme and severe usage industrial applications. FLEXTREME products can safely be immersed in fresh or sea water up to 100 meters depth (10 bars) and is approved by “Bureau VERITAS” for ''Marine'' applications. This cable of rate voltage 450 / 750 V can only be used in installations the nominal of which does not exceed 750 V. As an exeption to the general rule, this cable can be used in fixed installation of nominal voltage up to 1 000 V - NF C 15-100 In fixe installation, those cables can be fixed on the wall, cable trays or cable ladders. In locals with explosion risks, step down of 15% current carrying capacities and conforme to NF C 15-100 instructions.     Cable Design   Conductor flexible circular plain or tinned copper, class 5, according to EN 60228 Temperatures In normal duty, Max 85ºC In short circuit, Max 200ºC Insulation Elastomer (optional separator tape) Cores identification by colours according to hereafter list Outer Sheath BLACK colour polychloropren or equivalent synthetic elastomer Marking PRYSMIAN FLEXTREME H07RN-F 3G1,5 Standards HD22.4, NF C32-102.4 Certificate/Approval USE Rated voltage 450/750V Identification of cores HD 308    2core                   Blue - Brown    3G                       Green/Yellow-Blue-Brown    4G                       Green/Yellow-Brown-Black-Grey    5G                       Green/Yellow-Blue-Brown-Black-Grey    7G or more         Green/Yellow-Black + numbers     read more

0,6/1kV YSLYCY-JZ/JB (Transparent Screen Cable) Application Power, control and connecting cable in electrical facilities for lossless data and signal transmission, fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry, humid and wet rooms. Outdoor use only with UV-protection, no laying underground. Cable Structure & Features Conductor material bare copper strand Condustor type acc. To Din VDE 0295 resp, IEC 60228 class5 Core insulation PVC Core identification acc. To Din VDE 0293 black cores with white numerals or colour coded with or without gn/ye Stranding stranded in layers Inner sheath material PVC Grey, RAL 7001 Overall shield copper braid tinned, coverage approx. 75% Outer sheath  PVC Sheath colour Transparent     Special Features / Remarks   4kV testing voltage largely resistant to acids, bases and usual oils free from lacquer damaging substances and silicone (during production) additional mechanical protection by inner sheath recommended for EMC-application confirm to RoHS confirm to 73/23/EWG-Guideline CE We are pleased to produce special versions, other dimensions, core and jacket colour on request.   Technical data   Standed acc. to DIN VDE 0245, 0250 and 0281 Rated Voltage Uo/U 600/1000V Testing voltage 4kV Conductor resistance acc. to DIN VDE 0295 class 5 resp. IEC 60228 class 5 Insulation resistance min. 20 MΩ x km Current carrying capacity acc. to DIN VDE, see Tecnical Guideline Min. bending radius fixed 6 x d Min. bending radius moved 15 x d Operating temp. Fixed min/max -30ºC / +80ºC Operating temp. moved min/max -5ºC / +80ºC Condustor temp. +70 °C in operation; +150°C in case of short-circuit Burning behavior self-extinguishing and flame-retardant acc. to IEC 60332-1   read more

PRYSMIAN 300/500V H05V-K, 450/750V H07V-K PVC Flexible Cable - Single Core Application Used in control panels and electrical equipments, on and under plaster as laid in conduit. When this cable is used in fixed installations with mechanically protected switchgear and control panels, the rated voltage is 600/1000 V.   Description: Singlecore, PVC Insulated Cable Rated voltage Uo/U: H05V-K (300/500V) H07V-K (450/750V) Type: H05V-K, H07V-K Standard: CPR(EN 50399), HAR, CE, RoHS  Construction: PVC insulated flexible wires with fine stranded copper conductors (Class 5) Colours: Black, G/Y, Red, Blue, Yellow, Brown, Orange, White, Purple, Grey   Max. operating temperature 70ºC Max. short circuit temperature 160ºC Fire performance  According to IEC 60332-1-2 Leadfree   Minimum Installation temp  -5ºC Test voltage (AC) 2,5kV-2.5kV   read more

300/500V LiYCY / LiYCY-OZ (Flexible Braided Screen Cable) Application For signal transmission between electronic devices, in computer systems or process control units with increased requirements to electromagnetic compatibility. Data Center Building Management Systems (BMS Cable).   Cable Structure & Features Conductor material Bare copper conductor Conductor class Fine stranded Class 5. Insulation PVC Screen type Cu-braiding Screen over strand Cu-braid, tinned Screen coverage 70% Sheathing material PVC Flame retardant VDE 0482-332-1-2 / IEC 60332-1 Oil resistant EN 60811-2-1 Max. operating temperature, fixed:  -30 - +80 °C Temperature, moved/during installation:  -5 - +70 °C Operating capacity: 120 nF/km Nominal voltage Uo:   300 V Nominal voltage U:   500V Test voltage:    1.2kV Core identification:   LiYCY (colours acc. DIN 47100) LiYCY-OZ (number coded without G/Y)   read more

PRYSMIAN 300/500V YSLY-OZ/JZ PVC Flexible Control Cable Application YSLY-JZ belongs to the family of control cables and electronic cables and is suitable for various industrial environments. The fine-stranded wires of the type YSLY ensure smooth data and power transmission.   Description  Mulricore, PVC Insulated, control cables Rated voltage  300/500V Type YSLY Standard PRDS 01/2010 Internal specification based on EN 50525-2-51 standard, except for reduced wall thickness and the normal TM2 ourtersheath material Construction Flexible copper conductor IEC 60228 class 5, PVC Insulation, PVC sheath Core Colours -OZ (Number coded without G/Y) -JZ  (Number coded with G/Y) Outer Sheath colour Grey Max. operating temp of cond 70ºC Fire performance  According to EN 60332-1 Leadfree   Minimum Installation temp  -5ºC Test voltage (AC) 2,5kV   read more

Prysmian  OZOFLEX ® H05RN-F   RUBBER Insulated Harmonized Cables   Construction Rubber insulated, oil-resistant and flame retardant, rubber outer sheathed cables with fine stranded copper conductor. Technical Data These cables are produced according to TS9765 HD22.4 S4 - Permissible operating temperature: 60 Deg C - colour of outer sheath: Black   Applications Used in damp places, in kitchen tools like water heaters, electrical ovens, in portable workshop tools like drills and hand lights, in where mechanical effects don't exist,  and in oily places. These cables are flame retardant according to IEC 60332-1. read more

Electra Cables Rubber Flexible VSD Cables (Neoprene Screen Cable) Application The Cables in Variable Speed Drives, Variable Frequency Drives, Electric Motors used.   Cable Structure & Features Conductor material Plain annealed copper Copper (Class 5 to AS/NZS1125 and IEC60228) Insulation EPR rubber compound Sheath: CPE (Colour: Black) read more